Racing Mama with Crossed Checkered Racing Flags Design Direct To Film (DTF) Transfer

DTF transfers can be pressed onto a variety of T-Shirt materials
including: 100% Cotton, 100% Polyester as well as Poly/Cotton Blends.

They can also be pressed onto can cooler sleeves, pillows, canvas, polyester leather, wood and more!! Our DTF transfers have a full white under base, making the design fully opaque.

This means that you can use
these transfers on ANY COLORED garment and the design will show in full color!!!

They have a soft feel and typically last longer than traditional screen-print transfers.

Our Turn around time is typically 1-2 business days (M-F) excluding weekends and major holidays.

During busy periods our TAT may grow but we will do our best to post current TAT in the shop banner.

Pocket: 3.5 inches
Infant: 5 inches
Toddler: 7.5 inches
Youth: 9.5 inches
Adult Small/Medium: 10.5 inches
Adult Large/XL: 11 inches

The size of the design will be based on the longest side of the design.

We do it this way because some designs height can exceed the width selected based on proportion and leave you with an undesirable/result.

If you need a transfer with an exact measurement or need clarification on how we size please contact us using the chat or contact form.

For any sizing recommendations, please send us a message using chat.

*Please note: Since all heat presses vary in terms of
temperature and pressure, below are general guidelines.  If this is your first time ordering with us, we do recommend ordering a few extra designs for use in determining optimal temp, time and pressure for your
press.

Print transfers MUST be heat pressed on the material. You CANNOT use an iron on these transfers.

~Pressing Instructions~

~ Heat Press is REQUIRED
~ Preheat garment to remove excess moisture
~ Align transfer on your garment in the appropriate spot
~ Temperature: 325 degrees
~ Time: 8 seconds
~ Pressure: Heavy
~ Allow Transfer to COOL before removing clear film
~ Lay Parchment Paper over design and repress for an additional 8 seconds to cure into shirt
~ Wait 24 hours before washing or stretching

WASHING INSTRUCTIONS:

Wait 24 hours before first washing. Turn the garment inside out. Machine wash with
mild detergent. NO bleach. Dry at a normal dryer setting on household machines. Do not dry clean. Do not use fabric softener. Instructions apply to the material only, please follow garment washing instructions as well.

~THE PRINTING QUALITY DEPENDS GREATLY ON THE QUALITY OF THE ARTWORK, IF IT LOOKS BLURRY ON YOUR SCREEN WHEN YOU ZOOM IN, THEN IT WOULD LOOK BLURRY IF PRINTED.

~YOU ARE RESPONSIBLE FOR ENSURING YOUR ARTWORK IS PRINT READY! WE WILL PRINT WHAT YOU SEND AND ARE NOT RESPONSIBLE FOR UNDESIRABLE PRINTS.

~IF YOU NEED HELP WITH YOUR IMAGES HELP IS AVAILABLE FOR ADDITIONAL FEES. PLEASE MESSAGE US.

~SEMI-TRANSPARENT (SEE-TROUGH) GRAPHICS CANNOT BE ACHIEVED IN DTF AND WILL PRODUCE UNDESIRABLE RESULTS.

~Actual colors may vary slightly. DTF prints use CMYK process (mixing of 4 colors to create 1 color).

~DTF does not print vibrant fluorescent neon's, metallics, or glows, We cannot guarantee that the colors you see accurately portrays the true color of the transfer.