Custom Yard Signs
Custom printed yard signs, 18 inches by 24 inches on 4mm corrugated plastic. Upload your own artwork and we print it in full color.
Choose single or double sided, and keep or drop the ground stake. Every sign ships ready to put out.
A note on orientation. The flutes in the board run one way. In the horizontal layout they run up and down, which is what a ground stake needs to grip. In the vertical layout they run side to side, so a stake will not hold. Vertical signs still work beautifully on an easel, against a wall, or screwed to a post.
Built for Outdoors
4mm corrugated plastic with full color graphics applied to the face. Sun, rain and sprinklers are what these are made for.
Single or Double Sided
Print one face or both. Double sided reads from either direction, which is what you want on a corner lot or a roadside.
Stake Included
Every sign comes with a ground stake unless you tell us you do not need one. Slide it into the flutes and push it in.
Upload. Approve. Advertise.
Upload your design at 150 DPI or higher at final size, then pick your orientation, one side or two, and whether you want a stake.
We send a proof for your approval, then print it in full color and apply it to the board.
It arrives ready to go. Slide the stake up into the flutes on the back and push the whole thing into the ground.
A Family's Dream, Printed One Yard Sign at a Time
We are a husband and wife shop in Ludowici, Georgia. Veteran owned, and small enough that the two of us touch every order that leaves the building.
Your signs are printed in house on our Mimaki printers, applied to the board by hand and trimmed clean. Nothing is imported, nothing is drop shipped from overseas, and nothing is handed to a third party we cannot answer for.
Supporting us means supporting a dream and we take that seriously on every single sign.
FAQ
What are your yard signs made of?
4mm corrugated plastic, the standard yard sign board, with your artwork printed in full color and applied to the face. It is light, rigid and does not soak up water.
What size are they?
18 inches by 24 inches, which is the standard yard sign size in the United States. It is what stake widths, sign frames and A-frames are all built around.
Single sided or double sided?
Your choice. Single sided prints one face. Double sided prints both, so the sign reads whichever way someone approaches it. On a corner lot, a roadside, or anywhere traffic passes in two directions, double sided is worth the difference.
If you pick double sided, you can use the same image on both faces or upload a different one for the back. The builder asks.
Does it come with a stake?
Yes, a ground stake is included with every sign at no extra charge. If you are mounting them another way, on an easel, a fence or a post, you can take the stake off in the builder and the price comes down.
Why does the orientation change whether a stake works?
This one matters, so here it is plainly. The board has flutes running through it, like a cardboard box does, and a ground stake works by sliding its wire legs up inside those flutes.
In the horizontal layout, 24 inches wide by 18 tall, the flutes run up and down and the stake grips properly.
In the vertical layout, 18 wide by 24 tall, the flutes run side to side, so there is nothing for a stake to slide into. A vertical sign will not stand on a stake.
Vertical still works well on an easel, leaned against a wall, zip tied to a fence, or screwed to a post. We will warn you in the builder rather than stop you, because plenty of people want vertical on purpose.
How long will it last outside?
These are built for outdoor use and shrug off rain and sprinklers from day one. Like anything printed, direct sun will fade the color eventually, and how fast depends on how much sun it gets. A sign in full southern exposure will fade sooner than one in shade.
What file should I send?
Design it at 150 DPI or higher at the final size, 18 by 24 inches. A yard sign is read from a car or across a lawn, so it does not need the resolution a close up print does. PNG, JPG, PDF, SVG, AI and EPS all work.
Keep anything important an inch in from the edge, and remember the bottom few inches can end up behind grass.
Do I get to see a proof?
Yes. Yard signs are proofed before we print, so you see exactly what is going on the board and approve it before anything is committed. Nothing prints until you say so.
Can I pick them up instead of shipping?
Yes, local pickup is available at 474 Prince Road SE, Ludowici, GA 31316. Please wait until you receive the ready for pickup email before heading over.
Can you design the sign for me?
We can. The upload box is required, so attach a screenshot or a reference picture of what you have in mind, then describe it in Special Instructions. It does not need to be print ready artwork. We will come back with a quote for the design work before anything is charged.